Skip to content

G.67Industries

Plumbing Invoices: What to Include and How to Collect Faster

A line-by-line sample, the right way to bill a midnight call-out, and a collection plan for every kind of payer, from homeowners to property managers.

By PayLinkPublished 6 min read

On this page6 sections
  1. 01A sample plumbing invoice, line by line
  2. 02How to show emergency and after-hours rates
  3. 03Photos belong with the invoice
  4. 04Who's paying, and how to collect
  5. 05Bigger jobs: repipes and sewer lines
  6. 06What to look for in plumbing invoicing software

A plumbing invoice should explain what was wrong and what you did, then price the job line by line, with labor, parts and any after-hours premium shown separately. Add before-and-after photos where you can, and collect payment when the job is finished: on site from a homeowner, or by text-to-pay link from a landlord or property manager who isn't there.

Definition

A plumbing invoice is the bill a plumbing business issues for work on a customer's pipes, drains, fixtures or gas lines. Besides itemizing the charges, it records what was found and repaired, and it becomes the customer's record of the work when a warranty or insurance question comes up later.

A sample plumbing invoice, line by line

Here is a hypothetical invoice for replacing a failed 50-gallon gas water heater in a single-family home. The prices are illustrations, not suggested rates.

LineQtyRateAmount
Service call and diagnosis1$95.00$95.00
Labor: remove failed heater, install and test new unit4.5 hrs$125.00$562.50
50-gallon gas water heater (brand, model, serial)1$1,150.00$1,150.00
Gas connector, fittings and valves1 lot$64.00$64.00
Haul-away and disposal of old heater1$60.00$60.00
Permit fee (passed through at cost)1$75.00$75.00
Subtotal$2,006.50
Sales tax, if it applies to this work in your stateAs applicable

The subtotal adds up as $95 + $562.50 + $1,150 + $64 + $60 + $75 = $2,006.50. Around the table, the invoice also needs the standard fields every invoice carries, from your license number to the payment terms, plus a payment link or QR code. Our guide to how to write an invoice covers those fields in full.

What makes the plumbing details useful

  • The model and serial number on equipment you install. The customer will need them for a warranty claim, and you'll want them on the next visit.
  • A plain description of the fault. "Tank leaking at base, corrosion visible; unit 14 years old per serial number" justifies a replacement better than "water heater replaced."
  • Location detail for hidden work. "Repaired pinhole leak in ¾-inch copper supply line, ceiling of first-floor laundry, 3 ft from north wall" tells the next plumber or an insurance adjuster exactly where the work is.
  • Permit and inspection references where a permit was pulled, with the permit number.
  • Warranty terms for your labor and for the parts, stated separately, since the manufacturer's warranty and yours are different promises.

How to show emergency and after-hours rates

A premium rate for nights and weekends is easy to justify and easy to argue about later, unless the customer agreed to it before you arrived. Tell them when they book and have the dispatcher note that they accepted. Then show it on the invoice in a way they can check.

Say your standard labor rate is $125 an hour and your after-hours rate is 1.5 times that, $187.50. A burst supply line on a Saturday night takes two hours. You can show it two ways:

Option A: after-hours rateOption B: standard rate plus premium
Labor, after hours: 2 hrs × $187.50 = $375.00Labor: 2 hrs × $125.00 = $250.00
After-hours premium: 2 hrs × $62.50 = $125.00
Total labor: $375.00Total labor: $375.00

The total is the same either way. Option B shows the customer exactly what the emergency cost them over a weekday visit, which tends to head off the "why is this so expensive" call. If you charge a flat emergency call-out fee instead, put it on its own line.

One naming point: call it an after-hours premium or emergency rate, not a surcharge. In payments, a surcharge means a fee for paying by credit card, which has its own card-network rules, and mixing the two up on an invoice confuses customers.

Photos belong with the invoice

Much plumbing work disappears once it's done. The pipe goes back behind the drywall and the customer has only your word that the job was as big as the invoice says. Photos fix that. Attach, or link from the invoice:

  • A photo of the problem as found: the corroded tank, say, or the root intrusion on the camera feed.
  • A photo of the completed repair before it's covered up.
  • For drain and sewer work, the camera inspection footage or stills, with the distance markers visible.

Photos head off disputes, and they're also useful to the customer. A homeowner filing an insurance claim for water damage, or selling the house, will want documentation of what was repaired and when.

Who's paying, and how to collect

Pay-on-completion is the goal for most residential plumbing work, but "the customer" isn't always the person standing in the kitchen. Plan the collection around who actually pays.

Who paysHow to collectWhen
Homeowner, at homeCard on the technician's device, or a QR code they scan to payBefore the technician leaves
Homeowner, not at homePayment link by text, with the photos and invoiceAs the job is finished
Landlord of a tenant-occupied homePayment link by text or email to the landlord; tenant signs the work orderSame day
Property managerInvoice on agreed terms, with the unit, work order number and photosPer the management company's terms
Commercial accountInvoice against a PO, with ACH as a payment optionPer the account's terms

The middle rows are where plumbing businesses lose time. A tenant can authorize an emergency repair but usually can't pay for it, and an invoice mailed to a landlord a week later starts a long wait. Agree the payment route at booking: get the landlord's mobile number and authorization, and text them the invoice and payment link the moment the job closes. That's the idea behind text-to-pay.

For the homeowner who is there, a QR code on the invoice screen works as well as a card reader, because the customer pays on their own phone. An amount-specific code for that invoice avoids anyone typing in the wrong figure.

Bigger jobs: repipes and sewer lines

A whole-house repipe or a sewer line replacement can run for days and cost far more than a service call. Bill it like a project. Take a deposit when the customer signs the estimate, which covers materials you're about to buy, and set out the balance in stages if the job is long. Our guides to deposit invoices and progress billing show how to set out each bill so the final invoice credits what has already been paid.

On large tickets, give the customer a bank payment option alongside cards. Card processing costs scale with the ticket, so offering ACH on a large job is worth more to you than on a service call.

What to look for in plumbing invoicing software

Plumbing invoicing software earns its keep if a technician can close out a job from a driveway, with the customer standing there or miles away. A short list of what to check:

  • Invoices built on a phone from your own price book, including after-hours rates.
  • Photos and camera footage attached to the job and visible to the customer with the invoice.
  • Payment by card on the device, plus links and QR codes for customers who pay remotely.
  • A record of who authorized the work, separate from who pays.
  • Sync with your accounting software, so the office isn't re-typing tickets.

Talk to us

Talk to us about how your business gets paid.

Book a free consultation and talk through how this applies to your business. If you have a recent processing statement, bring it along.