Skip to content

G.71Industries

B2B Payments: Methods, Costs and How to Get Paid Faster

How businesses actually pay each other, what each method means for the supplier on the receiving end, and the changes that shorten the wait.

By PayLinkPublished 7 min read

On this page6 sections
  1. 01How B2B payments differ from consumer payments
  2. 02B2B payment methods compared
  3. 03What B2B buyers want from a supplier's payment process
  4. 04What each method costs the supplier
  5. 05How to get paid faster on B2B invoices
  6. 06Frequently asked questions

B2B payments are payments from one business to another, usually for goods or services bought on invoice terms. In the US the main methods are paper checks, bank transfers (ACH and wire) and cards, including virtual cards. For a supplier, the method matters almost as much as the amount, because it decides how quickly the money arrives and what it costs to accept.

Definition

B2B payments (business-to-business payments) are transfers of money between companies in settlement of a commercial transaction, such as a supplier's invoice. They are typically larger than consumer payments and often made on credit terms, with the money released only after the buyer's accounts payable process has approved it.

How B2B payments differ from consumer payments

A consumer sees a price and pays it. A business buyer usually receives an invoice and routes it for approval, often matching it to a purchase order, before scheduling it into a payment run that may happen once or twice a week. The supplier's money waits on each of those steps.

That process explains most of what B2B buyers want from a payment method: control over timing and a record that suits their accounting. Electronic payment keeps growing: Nacha reports that businesses made 8.1 billion business-to-business payments over the ACH Network in 2025, up 9.9% on 2024.

B2B payment methods compared

MethodWho starts itSpeedFinalityRemittance detail
Paper checkBuyerMail time, then deposit and clearingCan bounce or be stoppedStub, if the buyer includes one
ACH creditBuyer pushes the paymentSame day, or scheduled up to two business days aheadCan be returned in limited cases under Nacha rulesCan travel with the payment, but often arrives separately or not at all
ACH debitSupplier pulls, with the buyer's authorizationSettles on banking daysCan be returned, for example for insufficient fundsSupplier knows which invoice it collected
Wire transferBuyerSame day within Fedwire hoursFinal and irrevocable once processedLimited free-text field
Commercial cardBuyerDepends on the supplier's processorSubject to card disputes and chargebacksCaptured on the payment page or invoice
Virtual cardBuyer's AP team or platformWhen the supplier processes the cardCard rules applyUsually sent with the card details

Paper checks

Many AP departments are still set up to pay by check. For the supplier, checks are the slowest and least predictable option: the check has to arrive and then clear, and it can be lost or stolen on the way. Checks are also a target for fraud, which our guide to check fraud covers in detail.

ACH

ACH is the workhorse of B2B payments. Nacha's fact sheet says the network processes payments for 23¼ hours each banking day and settles them four times a day, and that senders can have ACH credits processed the same business day or schedule them up to two business days ahead. Settlement happens only when the Federal Reserve's National Settlement Service is open, so not on weekends or federal holidays.

Same Day ACH is subject to a per-payment limit. Nacha raised that limit from $100,000 to $1 million effective 18 March 2022, and has announced it will rise to $10 million on 17 September 2027. A payment over the limit isn't eligible for same-day settlement. For the full mechanics, see what an ACH payment is.

Wire transfers

Wires suit large, time-critical payments where finality matters, such as a closing or a first order from a new customer. The Federal Reserve describes its Fedwire Funds Service as a real-time gross settlement system whose transfers are immediate, final and irrevocable once processed. Its business day runs from 9:00 p.m. Eastern on the preceding calendar day to 7:00 p.m. Eastern, Monday through Friday, excluding designated holidays. Ask your bank for its own cut-off time for sending wires, which will fall inside that window. Our comparison of ACH vs wire transfer covers when each makes sense.

Commercial and virtual cards

Some business buyers prefer to pay suppliers by card, for the payment terms their card gives them and, sometimes, for rewards or rebates. With a virtual card, a single-use card number issued for a specific invoice, the buyer's AP team or payment platform sends the supplier a card number to charge. For the supplier, card payments are fast to receive and easy to match, but they carry processing costs that matter on large invoices. Our guide to virtual card payments covers how to decide whether to accept them.

What B2B buyers want from a supplier's payment process

Seen from the AP desk, a supplier who is easy to pay is one whose invoices go through approval without questions. That means:

  • A purchase order number on every invoice, where the buyer uses POs.
  • Correct legal names and remit-to details, unchanged from one invoice to the next.
  • A W-9 on file and any vendor onboarding forms completed before the first invoice.
  • A choice of payment method, so AP can pay the way its process is set up for.
  • Payment instructions they can trust. Unexpected changes to bank details are a classic fraud signal, and a careful AP team will stop and verify them.

On the supplier's side, the other half of the job is matching each payment to the invoice it pays. When a payment arrives without that information, someone has to work it out, so ask buyers to send remittance advice with every payment, or give them a way to pay that captures the invoice number automatically.

What each method costs the supplier

The costs come in two forms. There are direct fees, which depend on your bank and processor, and indirect costs: staff time spent depositing checks and matching payments, plus the cost of waiting for the money.

Card acceptance usually has the largest direct cost, and it scales with the invoice. At a hypothetical all-in rate of 2.5%, a $20,000 invoice paid by card costs the supplier $500 ($20,000 × 2.5%). Some suppliers accept that as the price of faster payment. Others steer large invoices toward ACH or, where card-network rules and state law allow, pass the cost on through a surcharge.

The pricing model matters at B2B volumes. Under interchange-plus pricing, each transaction is billed at its own interchange rate, which the card networks set, plus a fixed processor markup, rather than at a blended rate that averages your cheapest and most expensive transactions. PayLink describes Interchange Plus, one of the pricing models it works with, as suited to higher-volume businesses, roughly $10,000 a month and up, including B2B.

How to get paid faster on B2B invoices

  1. Invoice the day the goods ship or the work is done. Every day of delay goes straight onto the time it takes to collect.
  2. Put a pay button on the invoice. A link that lets the approver pay by ACH or card skips the step where someone sets up a payment in the bank portal.
  3. Make ACH the default for large invoices. Show it first on the payment page, and include your remittance details on every invoice for buyers who push payments from their own bank.
  4. Offer ACH debit for repeat customers. With the buyer's authorization, you collect each invoice on the due date instead of waiting for it to make a payment run.
  5. Follow up on a schedule. A reminder before the due date catches invoices that are stuck in approval while there's still time to fix them.

To put a value on this, take a hypothetical supplier invoicing $300,000 a month, or about $10,000 a day. Suppose 40% of that volume is paid by check, and moving those customers to electronic payment shortens their payment time by five days. The cash released is 40% × $10,000 × 5 = $20,000, freed once and kept for as long as the faster pattern holds.

Frequently asked questions

Q.01

What is a B2B payments platform?

A B2B payments platform, sometimes sold as a B2B payments solution, is software that lets a business send or receive payments with other businesses electronically, usually tied to its invoicing and accounting. For a supplier, the features that matter most are pay-enabled invoices that accept both ACH and cards, and automatic matching of each payment to the invoice it settles, so the books update without anyone re-keying them.

Q.02

Do I have to accept cards from business customers?

No. Which methods to accept is your decision, and many suppliers accept cards only below a certain invoice size or ask customers to pay large invoices by ACH. Weigh the processing cost against the value of faster payment and of keeping customers who prefer cards, and tell customers your policy before the invoice arrives rather than after.

Q.03

Is ACH or wire better for a large B2B payment?

It depends on what matters more. A wire through Fedwire is final once processed, which suits a one-off payment where the supplier needs certainty, such as a first order. ACH generally costs less and suits regular invoices from established customers. Same Day ACH also has a per-payment limit, currently $1 million and due to rise to $10 million on 17 September 2027, which can rule it out for very large amounts.

Sources

Talk to us

Talk to us about how your business gets paid.

Book a free consultation and talk through how this applies to your business. If you have a recent processing statement, bring it along.