Skip to content

G.33Receivables

Cash Flow Management for Small Businesses: Start With Receivables

How a seasonal service business pulls its cash forward by changing when and how it bills, and the 20-minute weekly routine that keeps it there.

By PayLinkPublished 6 min read

On this page8 sections
  1. 01Why receivables come first
  2. 02Bill recurring customers in advance, automatically
  3. 03Collect at the job instead of at the end of the week
  4. 04Take deposits on equipment
  5. 05Then manage the outflows
  6. 06A weekly cash routine that takes 20 minutes
  7. 07The numbers worth tracking
  8. 08Frequently asked questions

Cash flow management is the work of making sure money comes in before it has to go out. For most small businesses the biggest lever is receivables: when you bill, how customers pay and how quickly you follow up. Fix those first. After that, time your own bills and keep a cash buffer sized to your fixed costs, and check your position every week rather than at month end.

Definition

Cash flow management is the practice of forecasting and timing the cash a business receives and pays out, so it can always meet its obligations and plan for slow periods. It is separate from profitability: a profitable business can still run out of cash if customers pay more slowly than bills fall due.

Why receivables come first

Most cash advice starts with cutting costs. Costs matter, but many small businesses have already trimmed what they can, while their receivables are run on habits nobody has questioned for years. Every invoice is cash you have already earned. Changing when you bill and how customers pay brings that cash in sooner without any customer buying less or any supplier getting paid less.

Take a hypothetical pool and spa service company with three trucks. It earns about $95,000 a month in season: $55,000 from 220 weekly maintenance accounts at $250 a month, and $40,000 from repairs and equipment replacements. Its owner keeps running short of cash in July, its busiest month, which is a classic receivables problem.

Where its cash was stuck

  • Maintenance was invoiced at the end of each month, by email, and customers paid on average 25 days later. June's maintenance money arrived around 25 July.
  • Repairs were invoiced in a batch every Friday from the techs' paper tickets. A repair finished on a Monday was billed four days later and paid about 20 days after that.
  • Equipment such as heaters and pumps was bought from the distributor up front, often weeks before the customer paid for the installation.

Busy months made it worse. More work in June meant more payroll and parts in June, with the matching cash arriving in late July and August.

Bill recurring customers in advance, automatically

The company moved its maintenance accounts to automatic monthly payment, charged on the 1st for the month ahead. June's $55,000 is now charged on 1 June instead of trickling in around 25 July, close to eight weeks sooner, and it happens every month without anyone sending an invoice or a reminder. In the month of the switch, the company collected both May's outstanding invoices and June's automatic charges: a one-time boost of about $55,000.

Customers who sign up authorize a card or bank account once, and are charged on the schedule you set. Recurring payments handle this for payment plans and subscriptions alike. Customers who won't authorize automatic payment can still be invoiced on the 1st with a pay link, which is better than billing at month end.

Collect at the job instead of at the end of the week

For repairs, the fix was to bill before the truck leaves. The tech closes the job on a phone and texts the homeowner a payment link while still in the driveway. Many customers pay on the spot. Those who don't get the same link again the next day. Our guide to text to pay covers how this works and what customers see.

The four-day billing lag disappeared, and with it the batch of Friday paperwork. If scheduling and job tickets live in one system, the invoice can go out the moment a job is marked complete.

Take deposits on equipment

A $4,500 heater replacement used to mean buying a $2,600 heater on day one and getting paid three weeks after installation. Now the company collects a 50% deposit, $2,250, when the customer approves the quote. That covers most of the part before it is ordered, and a customer who has paid a deposit is less likely to cancel. See how to write a deposit invoice for wording and timing.

Then manage the outflows

With receipts pulled forward, the outgoing side needs less firefighting, but a few habits still help:

  • Pay bills on their due date, not when they arrive. If a supplier gives you 30 days, use them, unless an early payment discount is worth more than holding the cash.
  • Line up large outflows with large inflows. Schedule equipment purchases and annual insurance premiums for weeks when receipts are strong and payroll isn't due.
  • Keep a buffer. Work out your fixed weekly costs, those you pay whether or not the phone rings. For the pool company that is about $22,000: $14,000 of payroll plus $8,000 of other fixed costs such as truck leases and insurance. Decide how many weeks of that you want in the bank, and treat the figure as a floor.

A seasonal business needs a bigger floor going into its slow months. The pool company's revenue drops by more than half in winter, so it builds its buffer through the summer and plans winter spending from a forecast rather than from whatever is in the bank.

A weekly cash routine that takes 20 minutes

Most cash shortfalls are visible in the numbers weeks before they reach the bank balance. A short fixed routine, every Monday, catches them while there is time to act.

  1. Write down cash in the bank, and divide it by your fixed weekly costs to get weeks of cover.
  2. Check that last week's recurring charges all went through. Contact anyone whose card was declined the same day.
  3. Check for completed jobs that haven't been billed. The target is none.
  4. Review open invoices over 15 days past due and call the largest.
  5. List the large payments due in the next four weeks, from payroll and loan payments to any big supplier bill.
  6. Update your cash flow forecast and look at its lowest week. If that week dips below your buffer, act now, while there is still time to chase specific invoices or move a purchase.

The numbers worth tracking

MeasureHow to calculateWhat it tells you
Weeks of cash coverCash in bank ÷ fixed weekly costsHow long you could operate if receipts stopped
Billing lagAverage days from job complete to invoice sentCash you are delaying yourself
Share collected at time of servicePayments received on the day of the job ÷ revenue billedHow much never becomes a receivable at all
Days sales outstandingReceivables ÷ credit sales × days in periodHow long invoiced customers take to pay
Forecast low pointLowest closing cash in your 13-week forecastWhether trouble is coming, and when

For the pool company, the change showed up first in the third row: within two months, more than half of repair revenue was being paid on the day of the job. Weeks of cover followed. For more ways to bring money in sooner, see our guide on how to get paid faster.

Frequently asked questions

Q.01

What is the difference between profit and cash flow?

Profit is revenue minus expenses for a period, usually recorded when the work is done. Cash flow is money actually received minus money actually paid, recorded when it moves. A business that invoices $95,000 in June has June revenue of $95,000, but if customers pay in July, June's cash flow may be negative. Both matter; cash decides whether you can make payroll.

Q.02

Should I use a line of credit to manage cash flow?

A line of credit is useful for smoothing timing gaps, such as buying parts for a big job before the customer pays. It is a poor fix for invoices that are routinely paid late, because you pay interest to cover your customers' slowness. Arrange it while the business is healthy, since lenders are more willing then, and fix receivables first so you draw on it less.

Q.03

How much cash reserve should a small business keep?

There is no single right figure. Start from your fixed weekly costs and decide how many weeks you want to cover, based on how predictable your revenue is and how quickly you could cut costs. A seasonal business, or one that depends on a few large customers, needs more cover than one with steady recurring revenue.

Talk to us

Talk to us about how long you wait to get paid.

Book a free consultation and talk through how this applies to your business. If you have a recent processing statement, bring it along.